Modified Polyamine Ceramic Epoxy
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments and exposure to corrosive soils. Provides low permeation to H_2_S gas, protects against MIC and provides chemical resistance to steel, ductile iron pipe and fittings for severe wastewater or buried exposures. A coal-tar free, resin-rich formulation with low pigment volume concentration (PVC) for maximum performance.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
- 5024 Sewer Pipe Green
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION section for coverage rates.
Carbon Steel: 30.0 to 50.0 mils (762 to 1270 microns) in one or more coats.
Ductile Iron: 40 mils (1015 microns) (nominal) in one or more coats.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Use Series 44-721 to increase film build. Amounts vary by kit size, refer to the Series 44-721 product data sheet. Contact your Tnemec representative for more information.
Volatile Organic Compounds
EPA Method 24: 0.19 lbs/gallon (23 grams/litre)
0.00 lbs/gal solids
Number of Components
Two: Part A (amine) and Part B (epoxy)
|Temperature||Set to Touch||Max. Recoat||To Place in Service|
|90°F (32°C)||1-2 hours||7 days||24 hours|
|75°F (24°C)||2-3 hours||7 days||2 days|
|55°F (13°C)||8-9 hours||7 days||3 days|
Note: If more than 7 days have elapsed between coats, the Series 431 coated surface must be mechanically abraded (scarified) before topcoating. Curing time will vary with surface temperature, air movement, humidity and film thickness.
Self-priming, Series N69 or Series N140. Note: Series 431 must be applied to Series N69 or N140 within 7 days. Scarify the surface with fine abrasive before topcoating if exceeding this maximum recoat window.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep