Ceramic-Modified Waterborne Aliphatic Polyurethane
Low odor, fast dry, low VOC, waterborne polyurethane coating for interior wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
- 05BL Gainesboro
- 25BL Fountain Bleu
- 42BL Blue Channel
- 04BR Desert Sands
- 15BR Pale
- 16BR Orion's Belt
- 68BR Twine
- 91GN Balsam
- 28GR Black Water
- 31GR Slate Gray
- 33GR Gray
- 46GR Sinker
- 28RD Monterrey Tile
- 02SF Lemon Yellow/Safety
- 06SF Candy Apple Red/Safety
- 11WH White
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
Unthinned: 0.74 lbs/gallon (89 grams/litre)
Thinned 15%: 0.74 lbs/gallon (89 grams/litre) †
914 mil sq ft/gal (22.4 m²/L at 25 microns). †
Number of Components
Two: Part A and Part B
Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Concrete: Series 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 84•, 104, 113•, 114•, 156•, 161, 201, 205, 237, 238, 270, 273, 280, 281, 287. •For use on vertical surfaces only. Note: Two coats are required over Series 201 primer to ensure proper hide and coverage. Certain products listed above may be suitable for use as intermediate coats. Contact your Tnemec Representative for complete system recommendations. When applying Series 297 over a broadcast or mortar system, an epoxy grout coat is required.
CMU: 130, 156, 218, 1254. Intermediate coat required (any of the above).
Drywall: Series 27WB, 151, 287
Steel: Series 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 84, 104, 161, 287
Galvanized Steel and Non-Ferrous Metal: Series 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 161
Note: A minimum recoat of 24 hours at 75°F (24°C) applies when using Series 27WB. Reference the Series 27WB product data sheet for additional cure information. More than one finish coat of Series 297 is required when used over Series 27WB to achieve uniform and desired gloss level.
57 ± 2.0% (mixed) †
|Temperature||To Recoat||To Service||Full Cure|
|75°F (24°C)||8 hours||24 hours||72 hours|
Curing time varies with surface temperature, air movement, humidity and film thickness.
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating aesthetics and performance. Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep