Aliphatic Polyester Polyurethane
Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
- 05BL Gainesboro
- 25BL Fountain Bleu
- 42BL Blue Channel
- 04BR Desert Sands
- 15BR Pale
- 16BR Orion's Belt
- 68BR Twine
- 91GN Balsam
- 28GR Black Water
- 31GR Slate Gray
- 33GR Gray
- 46GR Sinker
- 28RD Monterrey Tile
- 02SF Lemon Yellow/Safety
- 06SF Candy Apple Red/Safety
- 11WH White
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Number of Components
Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)
1,075 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
67 ± 2.0% (mixed) †
Steel: Series 20, 27, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 90-1K97, 104, L140, L140F, N140, N140F, V140, V140F, 161, 205.
Concrete: Series 66, L69, L69F, N69, N69F, 104, 161, 201, 203, 205, 237, 237SC, 238, 293SC, 280, 281, 287.
Unthinned: 0.16 lbs/gal solids
Thinned 10% (Max) (No. 39 Thinner): 0.16 lbs/gal solids
Thinned 10% (Max) (No. 42 Thinner): 0.16 lbs/gal solids
Volatile Organic Compounds
Unthinned: 2.41 lbs/gallon (288 grams/litre)
Thinned 10% (Max) (No. 39 Thinner): 2.76 lbs/gallon (330 grams/litre)
Thinned 10% (Max) (No. 42 Thinner): 2.80 lbs/gallon (335 grams/litre) †
Series 20, 27, 66, L69, L69F, N69, N69F, 104, L140, L140F, N140, N140F, 161, 205, 210, 237, 238, 270, 273, 280, 281, 282, 287. Note: Before topcoating with Series 290, any Tnemec epoxy exterior exposed for more than three weeks must be scarified or reprimed with itself. Mechanically abrading or power-sanding is the preferred method of scarification. The maximum recoat time for Series 210, 237, 238, 280, 281 and 282 is 24 hours. Refer to those product data sheets. Inorganic zinc-rich primers require an epoxy intermediate coat. Note: Scarification using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad is required if topcoating Series 290 with itself. Note: When applying Series 290 over a broadcast or mortar system, an epoxy grout coat is required.
|Temperature||Min. Recoat||To Service||Chemical Resistance|
|75°F (24°C)||12 hours||24 hours||7 days|
Curing time varies with surface temperature, air movement, humidity and film thickness.
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on substrate (surface) and other variables. Contact your Tnemec representative.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep