Decorative Flake-Filled Modified Polyamine Epoxy
A customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. Protects against abrasion and mild chemicals with an aesthetically pleasing speckled appearance.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
- 501 224 Deco-Fleck 501
- 502 224 Deco-Fleck 502
- 503 224 Deco-Fleck 503
- 504 224 Deco-Fleck 504
- 505 224 Deco-Fleck 505
- 506 224 Deco-Fleck 506
- 507 224 Deco-Fleck 507
- 508 224 Deco-Fleck 508
- 509 224 Deco-Fleck 509
- 510 224 Deco-Fleck 510
- 511 224 Deco-Fleck 511
- 512 224 Deco-Fleck 512
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Volatile Organic Compounds
Unthinned: 0.13 lbs/gallon (15 grams/litre)
Decorative flake—multi-colored appearance. The finished appearance will depend on the number, type and film thickness of the clear finished coats selected.
From 20 mils DFT to 1/16” depending on broadcast method.
Number of Components
Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored Flake: Part C
The Part C colored flake is available from Tnemec or can be purchased from a different supplier.
Random Flake Broadcast: Series 224, 247, 248, 284, 285, 286, 294, 295, 296
Refusal Flake Broadcast: Series 224, 247, 248, 256, 284, 285, 286, 294, 295, 296.
Note: If Series 247, 248, 285, 294, 295 or 296 is selected for the finish coat, an intermediate coat of Series 224 or 284 is required. Refer to the StrataShield Installation and Application Guide for floors.
Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
|Temperature||To Topcoat/Broadcast||To Place in Service|
|75°F (24°C)||12 to 24 hours||24 hours|
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if flake has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep