Series 135
Chembuild
Generic Type
Modified Polyamidoamine Epoxy
Common Usage
High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.
View more product detailsProduct Data Sheets
- English_Series_135_Chembuild_pds.pdf
- French_Series_135_Chembuild_pds.pdf
- Spanish_Series_135_Chembuild_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 488 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Recommended DFT
Conventional Build: 4.0 to 6.0 mils (100 to 150 microns) per coat.
Hi-Build: 7.0 to 9.0 mils (180 to 230 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Finish
Semi-gloss
Volatile Organic Compounds
EPA Method 24 Unthinned: 0.72 lbs/gallon (86 grams/litre)
Thinned 15% (No. 19 Thinner): 1.91 lbs/gallon (229 grams/litre)
Thinned 15% (No. 18 Thinner): 2.05 lbs/gallon (246 grams/litre)
Thinned 15% (No. 62 Thinner): 0.72 lbs/gallon (86 grams/litre) †
Primers
Steel: Self-priming
Galvanized Steel and Non-Ferrous Metal: Self-priming
Number of Components
Two: Part A and Part B
Theoretical Coverage
1,347 mil sq ft/gal (33.1 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 1.29 lbs/gal solids
Thinned 15% (No. 19 Thinner): 2.54 lbs/gal solids
Thinned 15% (No. 18 Thinner): 1.29 lbs/gal solids
Curing Time
| Temperature | To Touch | To Handle | To Recoat |
|---|---|---|---|
| 75°F (24°C) | 6 hours at 5.0 mils DFT 125 microns) | 18 hours | 24 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Topcoats
Series 6, 30, 35, 66, L69, L69F, N69, N69F, V69, V69F, 73, 84, 104, 115, 161, 1028, 1029, 1070, 1071, 1072, 1074, 1074U, 1075, 1075U. Note: When topcoating with Endura-Shield polyurethane finish, exterior exposed Series 135 has the following maximum time to recoat: Series 73, 1074/1074U or 1075/1075U, 60 days. Series 1070, 1071 or 1072, 14 days. If these times are exceeded, an epoxy intermediate coat or scarification is required before topcoating. Refer to appropriate topcoat data sheet for additional information.
Volume Solids
84.0 ± 2.0% (mixed) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep