Series 30
Spra-Saf EN
Generic Type
Hydrophobic Acrylic Polymer
Common Usage
An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated to resist mildew growth on the paint film. Provides good gloss and color retention on structural steel, tanks, towers, pipes and similar structures. May also be used on a wide range of other substrates and many aged coatings, interior or exterior (test patch is recommended per Technical Bulletin 98-10). Application methods include “dry-fall” under certain conditions (see Application).
Note: Spra-Saf EN’s “dry-fall” characteristics help reduce the potential for overspray problems on buildings and surrounding property.
Product Data Sheets
- English_Series_30_Spra_Saf_En_pds.pdf
- French_Series_30_Spra_Saf_En_pds.pdf
- Spanish_Series_30_Spra_Saf_En_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Number of Components
One
Volume Solids
38.0 ± 2.0% †
Recommended DFT
2.0 to 4.0 mils (50 to 100 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
HAPS
Unthinned: 1.03 lbs/gal solids
Thinned 5%: 1.03 lbs/gal solids
Theoretical Coverage
610 mil sq ft/gal (15.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Finish
Satin
Primers
Steel: Self-priming or Series 10, 27, 37H, 66, L69, N69, N69F, 90E-92, 115, 135, L140, L140F, N140, 151, 161.
Note: Allow Series 10 and 37H to cure one week before topcoating.
Volatile Organic Compounds
Unthinned: 1.60 lbs/gallon (192 grams/litre)
Thinned 5%: 1.60 lbs/gallon (192 grams/litre) †
Curing Time
Temperature | To Touch | To Handle | To Recoat |
---|---|---|---|
75°F (24°C) | 1 hour | 3 hours | 4 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep