Series 224
Deco-Fleck
Generic Type
Decorative Flake-Filled Modified Polyamine Epoxy
Common Usage
A low ambering, customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. Protects against abrasion and mild chemicals with an aesthetically pleasing speckled appearance.
View more product detailsProduct Data Sheets
- English_Series_224_Deco_Fleck_pds.pdf
- French_Series_224_Deco_Fleck_pds.pdf
- Spanish_Series_224_Deco_Fleck_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 501 224 Deco-Fleck 501
- 502 224 Deco-Fleck 502
- 503 224 Deco-Fleck 503
- 504 224 Deco-Fleck 504
- 505 224 Deco-Fleck 505
- 506 224 Deco-Fleck 506
- 507 224 Deco-Fleck 507
- 508 224 Deco-Fleck 508
- 509 224 Deco-Fleck 509
- 510 224 Deco-Fleck 510
- 511 224 Deco-Fleck 511
- 512 224 Deco-Fleck 512
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Decorative flake—multi-colored appearance. The finished appearance will depend on the number, type and film thickness of the clear finished coats selected.
Primers
Concrete: Series 201, 205, 208, 237, 238, 241, 287. Note: A color complimenting the flake blend should be selected.
Volatile Organic Compounds
Unthinned: 0.13 lbs/gallon (15 grams/litre)
Recommended DFT
From 20 mils DFT to 1/16” depending on broadcast method.
Number of Components
Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored Flake: Part C
The Part C colored flake is available from Tnemec or can be purchased from a different supplier.
Topcoats
Random Flake Broadcast: Series 224, 247, 248, 284, 285, 286, 294, 295, 296
Refusal Flake Broadcast: Series 224, 247, 248, 256, 284, 285, 286, 294, 295, 296.
Note: If Series 247, 248, 285, 294, 295 or 296 is selected for the finish coat, an intermediate coat of Series 224 or 284 is required. Refer to the StrataShield Installation and Application Guide for floors.
Curing Time
Temperature | To Topcoat/Broadcast | To Place in Service |
---|---|---|
75°F (24°C) | 12 to 24 hours | 24 hours |
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if flake has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Volume Solids
100% (mixed)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep