Series 222
Deco-Tread
Generic Type
Modified Polyamine Epoxy
Common Usage
A low ambering, multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact, abrasion and has very good chemical resistance with an aesthetically pleasing appearance.
View more product detailsProduct Data Sheets
- English_Series_222_Deco_Tread_pds.pdf
- French_Series_222_Deco_Tread_pds.pdf
- Spanish_Series_222_Deco_Tread_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 201 222 Deco-Tread 201
- 202 222 Deco-Tread 202
- 203 222 Deco-Tread 203
- 204 222 Deco-Tread 204
- 205 222 Deco-Tread 205
- 206 222 Deco-Tread 206
- 207 222 Deco-Tread 207
- 208 222 Deco-Tread 208
- 209 222 Deco-Tread 209
- 210 222 Deco-Tread 210
- 211 222 Deco-Tread 211
- 212 222 Deco-Tread 212
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
Unthinned: 0.13 lbs/gallon (15 grams/litre)
Curing Time
Temperature | To Topcoat/Broadcast | To Place in Service |
---|---|---|
75°F (24°C) | 12 to 24 hours | 24 hours |
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Topcoats
Series 247, 248, 256, 284, 285, 294, 295, 296. Note: If Series 247, 248, 285, 294, 295 or 296 is selected for the finish coat, an intermediate coat of Series 284 is required. Refer to the StrataShield Installation and Application guide for floors.
Surfacer/Filler/Patcher
Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Volume Solids
100% (mixed)
Number of Components
Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
Field Colorant - One: (optional) Series 820
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Recommended DFT
Minimum of 1/8”. Requires two broadcast applications at 1/16” each or applied as a slurry broadcast.
Finish
Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of the clear finish coats selected.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep